Wine pairs nicely with a Design and Make CNC project!

Possible Layout

Another Possible Layout

All 11 Models

Assembled Layout

Project Sheet

PLUS TWO BONUS PROJECT SHEETS!

This project includes 11 models:

  • Grapes No.2
  • Grape Leaf No.2
  • Grape Leaf No.3
  • Grape Vine No.1
  • Grape Vine No.2
  • Grape Vine No.3
  • Grape Vine No.4
  • Wine Bottle Coaster No.1
  • Wine Bottle Coaster No.2
  • Wine Bottle Coaster No.3
  • Wine Coaster No.1

Plus 1 Assembled Layout and 3 Project Sheets for just $30.00

Order and Download it today!

Above are a few other very quick layouts that just might get you inspired!

Hope you enjoy this project...

Comments Welcome!

Hack of the Week No.110

"The Land Of The Free"

Today is July 4th and this hack is for all of our US friends!

"The Land Of The Free"

This patriotic layout was created using models from these projects:

The font we used to simulate the v-carving on this layout is called:  Palatino Linotype

Note - This hack was assembled in Aspire V8 for presentation purposes.  It could have been done in VCarve Pro V8 or VCarve Desktop.

 

Here is a great Independance Day layout that is sure to inspire you to create a project that celebrates the great land you live in!  This layout uses just 2 models from the Around the World No.1 - USA project.

Thank you Don for sending this into us!  Happy July 4th!

God Bless America

Why not hack together your own layout mixing and matching models from other projects or from your own library!  For some great inspiration check out our  hacks page!

Be safe and let the chips fly!

The Design and Make Team

Hack of the Week No.94

This hack was inspired by a finished project hack we received from Don Harding!  What a great looking green finish.

Our version of this "Luck of the Irish" decoration was created using models from these projects:

The font we used to simulate the v-carving on this layout is call:  Umber SSK

Note - This hack was assembled in Aspire V8 for presentation purposes.  It could have been done in VCarve Pro V8 or VCarve Desktop.

Don's inspirational finished piece! 

"This Plaque was Machined in Oak.
The Stain was hand mixed with Fast Sol Dyes
that I picked up at a finishing class 100 years ago.
I was hesitant on mixing with alcohol or water.
I mixed with alcohol and you see the results. GREAT!!
Blue (GN) Yellow 4 (GN) = GREEN I learned that
blue and yellow =green from my great granddaughter
she is 6.
Sealed with my usual Matte Clear spray.
Gotta go get another project to do."

Don this looks so nice!!! Thanks for sharing and inspiring this Hack of the Week!

His version uses the ribbon from the Home for the Holidays No.2 CNC project.

A Little Something Extra

If you were green with envy like we were with the finish that Don achieved with his dyes the following tip might be helpful. The dye really makes the texture and grain of the wood look great.  We wanted to simulate that inside of our Aspire software so we created a custom material image that comes close.

Click image to zoom so you can see the folder location.

If you right click on the Green Pine image you can choose "Save image as..." and save it to your Vectric Material Images folder it will be available for you to use.   Once you do that the Green Pine material will be available in your "Appearance" dropdown when setting up your Job Setup in Aspire, VCarve Pro or Desktop. 

Note: if you have your Vectric software open when you add any material to the materials folder you will need to restart your software before it will show in the dropdown.

Why not hack together your own layout mixing and matching models from other projects or from your own library!  For some great inspiration check out our  hacks page!

Be safe and let the chips fly!

The Design and Make Team