Scott Pearlman and The Brightwood Tavern

Scott Pearlman is at it again and he has set the standard higher for himself.  His latest project is not motorcycle related, like his last one, but we are pretty sure you will like it just the same!  He used one of our projects to create this tavern sign. 

The Brightwood Tavern Sign

"I simply used all the 3D images from the "Western Saloon #1" package. I only had inch and a half cedar, so because the bull skull was over an inch in height, I had to make a plywood backing plate. Lots of hand sanding and a clear coat brought out the cedar highlights.
Thanks for all your design work."

Scott sure did make that cedar look fantastic, not to mention his layout is top notch! 

Thanks again Scott for sharing your project with us!

For more Customer Focus posts click here!

Choose a direction and ride!

One Possible Layout

Here's to all of those bike enthusiasts that know what a knucklehead is.  After we released the first installment in the Let's Ride projects it was brought to our attention that there are a lot of fans of both the Panhead and the Knucklehead motors.  So here you have it...

This project would be perfect for the vintage motorcycle lover, biker admirer or just about any project that requires that vintage bike feel.  How about a sign to hang outside your garage, shop or house reminding visitors of your passion for riding.  You might even consider adding a custom biker bar wall sign to your basement bar.

All 6 Models

Assembled Layout

Project Sheet

This project includes 6 models:

  • Knucklehead Motor
  • Vintage Bike No.1
  • Flames No.1
  • Chain No.1
  • Ribbon No.20
  • Garage Sign No.5

Plus 1 Assembled Layout and Project Sheet for just $30.00!
 

Order and Download it today!

Above are a few other very quick layouts that just might get you inspired!

Hope you enjoy this project...

Comments Welcome!

Be safe and let the chips fly!

The Design and Make CNC Projects Team

Mother's Day and Fun in the Sun!

John Mordus is back with two great projects to share with us.   With his first project he has created a layout that can be easily customized with a unique message for a very special person!

Mom's Garden

"Mother's day and springtime are coming up so I made a bunch of these up. Used your Mother's Garden No.1."

As you can see his layout was easily customized with different v-carving to make it a very special gift!

"Used a glued up 1" - 2' x 4' pine panel from big box store - can get 6 of these out of 1 piece. Minwax stain - 4 coats of oil based poly for inside - 4 coats of spar varnish is going outside"

Gerry's Garden

Best Mon

#1 Mom

His second project is a little work in progress that he has given us a sneak peek at.

"Experimenting a little for a Jimmy Buffet fan. Still needs some tweaking on the different layers."

"24 x 12" - 1" glued up pine panel"

He used models for the Under the Sea No.1, Fun in the Sun No.2 and the beer mug that came included in his Aspire software.  What a great looking hack just as it is!

Thank you, again, John for sharing these special projects with us!

For more Customer Focus posts click here!